供应


智能制造网供应网 YL-1162-高低温*材料试验机High and Low Temperature Tensile Testing

YL-1162-高低温*材料试验机High and Low Temperature Tensile Testing

  • 产地
  • 所在地
  • 东莞越
  • 广东东莞市

更新时间:2018-05-15

有效日期:已过期

产品详情

YL-1162高低温拉力试验机,标签剥离力试验机,不干胶剥离试验机,胶带剥离强度试验机

用         途:专门为环境测试所改良之机型,加装高低温试验箱,可在不同的温度环境测试材料之拉力, 压力,撕裂,剪力,剥离力,解卷力,环型初粘力等物理特性. 使用常温测验时,可将高低温箱移开增加使用空间及方便性。

软件功能:
测控系统是专为微机电子*试验机、微机液压*试验机、微机压力机设计的测控系统。可进行拉伸、压缩、弯曲、剪切、撕裂、剥离试验。采用PC机和接口板进行数据的采集、保存、处理和打印试验结果。可计算zui大力、屈服力、平均剥离力、zui大变形、屈服点、弹性模量等参数;可进行曲线处理、多传感器支持、图形图像化的接口、灵活的数据处理、MS-ACCESS数据库支持,使系统功能更为强大。

容量选择

10N、20N、50N、100N、200N、500N、1KN、2KN、5KN、10KN(可选双容量配制)

温度范围

0,-20,-40,-60,-70℃~150℃

显示器

电脑显示方式

力量分辨率

1/250,000

力量精度

≤±0.5%

行程分辨率

0.005mm

控制方式

拉力机全电脑操作方式

温度控制

PID自动演算,稳定误差

显示精度

0.1℃

温度精度

±1℃

循环系统

风扇强制循环系统

加热系统

SUS304不绣钢散热式加热器

冷却系统

风扇散热式,高效率压缩机、环保冷媒

保护装置

漏电及过负载保护器、压缩机过保护器、加湿器过热保护、温度极限保护装置;

箱体材质

SUS#304不绣钢

试验行程

1300mm(试验箱移开后拉力机单机操作使用)

试验宽度

720mm(试验箱移开后拉力机单机操作使用)

试验箱空间

50×48×65cm(W×D×H)

试验速度

0.5~500mm/min 电脑设定, 附夹具上下快速调节按钮

力量单位转换

kgf,N,Ibf,g,ton,Mpa

停机模式

过载停机、、紧急停止键、试件破坏自动停机、上下限设定自动停机、自动复位功能

机台尺寸

110×160×220cm(W×D×H)

机台动力

伺服马达驱动,同步轮及精密滚珠丝杆传动

功 率

400W

机台重量

约420kg

使用电力

220V 50/60HZ 30A

标准配置

夹具延伸杆、散热装置、夹具1组、电脑软件、USB电脑连线;

选购

个人电脑

 

 

 

 

 

 

 

 

 

 

 

 

 

 

YL-1162 High and Low Temperature Tensile Testing Machine

Purpose:

This tester is designed as improved model for environment testing, installation high and low temperature testing chamber, can test tensile, pressure, tearing, shearing, peeling strength, deconvolution strength, ring initial adhesion strength and other physical performance. Can remove the chamber to increase use space and bring convenience when using room temperature tests.

Software Function:

Test & Control System is designed for PC Electronic Universal Testing Machines, PC Hydraulic Universal Testing Machines and PC Compression testers; can conduct tensile, compression, bending, shearing, tearing and peeling test; use PC and interface board for data collection, preservation, processing and printing test result; can calculate max force, yield strength, average peeling force, max deformation, yield point, elastic modulus and other parameters; can conduct curve graphics processing, multi-sensor support, video and image interface, flexible data processing, MS-ACCESS database support, making more powerful function of system.

 

Specification:

Capacity

10N, 20N, 50N, 100N, 200N, 500N, 1KN, 2KN, 5KN, 10KN ( can select double capacities reparation)

Temperature Range

0, -20, -40, -60, -70~150

Display

Computer display mode

Force Resolution

1/250,000

Force Accuracy

≤±0.5%

Stroke Resolution

0.005mm

Control Mode

Tensile tester all computerized operation mode

Temp. Control

PID automatic calculation, stable error

Display Accuracy

0.1

Temp. Accuracy

±1

Circulation System

Fan force circulation system

Heating System

stainless steel heat radiation type of heater

Cooling System

Fan cooling type, high-efficiency compressor, environmental protection cooling medium

Protection Device

Leakage and overload protector, compressor over protector, humidifier temperature protection, temperature limit protection device

Chamber Material

SUS#304 stainless steel

Test Stroke

1300mm (after removing chamber, stand-alone operation and use tensile machine)

Test Width

720mm (after removing chamber, stand-alone operation and use tensile machine)

Test Speed

0.5~500mm/min, can set by computer, with up & down fast adjustment button of grips

Force Unit Switch

Kgf, N, Ibf, g, ton, Mpa

Stop Mode

Overload stop, emergency stop button, specimen damage automatic stop, upper & lower limit set automatic stop, automatic reset function

Machine Dimension

110×160×220cm(W×D×H)

Machine Drive

Servo motor drive, synchronous wheel and precision ball screw drive

Power

400W

Machine Weight

Approx 420kg

Power Supply

220V 50/60HZ 30A

Standard Device

Extension pole of grips, heat abstractor, 1 set of grips, computer software, USB computer connection wires

Optional

Personal computer


免责声明:以上所展示的信息由企业自行提供,内容的真实性、准确性和合法性由发布企业负责,智能制造网对此不承担任何保证责任。

在线询价

 

东莞市越联检测仪器有限公司

型:
生产厂家
联系人:
刘佩武

联系我时,请说明是在智能制造网上看到的,谢谢

商家概况

主营产品:
拉力机、拉力强度试验机、剥离力试验机、万能材料试验机、恒温恒湿试验机、恒温恒湿箱、冷热冲击试验箱、胶带保持力试验机、胶带初粘性试验机、剥离强度试验机、箱包测试仪器、胶带测试仪器
公司性质:
生产厂家

该商家其它产品

摩擦系数试验机 Coefficient of Friction Tester

摩擦系数试验机 C...

摘要:说明:摩擦系数仪可以方便 [详细]
橡胶拉伸强度试验机|拉力测试机

橡胶拉伸强度试验...

摘要:用途:本机可测各种材料之 [详细]
橡胶拉伸强度试验机|拉力机

橡胶拉伸强度试验...

摘要:用途:本机可测各种材料之 [详细]
UV紫外线耐候试验箱(按键式)

UV紫外线耐候试验...

摘要:用途:紫外光耐气候试验箱 [详细]
UV紫外光耐候试验机(按键式)

UV紫外光耐候试验...

摘要:用途:紫外光耐气候试验箱 [详细]
新标准振荡冲击试验机QB/T2155-2010

新标准振荡冲击试...

摘要:YL-3302皮箱振荡冲击试验机 [详细]
越联振荡冲击试验机 标准QB/T 2155-2010

越联振荡冲击试验...

摘要:YL-3302皮箱振荡冲击试验机 [详细]
电子式拉力机|简易型拉力试验机

电子式拉力机|简...

摘要:越联检测仪器主要生产拉力 [详细]

其它商家同类产品


新手指南
了解智能制造卖家注册买家注册操作指南手机智能在线
旗下子站
智能控制机器人物联网3D打印
站点导航
找资讯找公司找产品找展会品牌商城
本站服务
会员服务企业建站广告服务SEO优化