供应


智能制造网供应网 CAN/LIN总线控制器编程仿真与编译调试工具

CAN/LIN总线控制器编程仿真与编译调试工具

  • 产地
  • 所在地
  • 广州市
  • 广东广州市

更新时间:2010-01-14

有效日期:已过期

产品详情

 RLink 
 In-Circuit Debugger & Programmer 


 

RLink is Raisonance's versatile, very low cost, high-performance In-Circuit Debugger & Programmer for STR7 (ARM7), STR9 (ARM9), STM32 (Cortex-M3), ?PSD (8051), ST7 and STM8. RLink, driven by Raisonance's Integrated Environment (RIDE), has been designed to connect to the user application board via the USB port allowing In-Circuit Programming and In-Circuit Debugging thanks to the serial protocol included in the used microcontroller.

RLink supports JTAG, ICC and SWIM:

  • 20-pin JTAG ARM adapter for STR7, STR9 & STM32 microcontrollers. Supported STR7 & STR9 derivatives.
  • 14-pin JTAG ?PSD adapter for ?PSD microcontrollers. Supported ?PSD derivatives.
  • 10-pin ICC-ST7 adapter for ST7 microcontrollers. Supported ST7 derivatives.
  • 4-pin SWIM-STM8 adapter for STM8 microcontrollers. Supported STM8 derivatives.
RLink in-circuit debugger & programmer


Characteristics:
  • Dynamically programmable: possible addition of new protocols without changing the hardware nor the firmware but only the software
  • Up to 2 Mbit/s
  • from 3V to 5V
  • Based on ST7651AR6 (USB1.1)
  • Flexible software architecture: already supports ?PSD, ST7, STM8, STR7, STR9 and STM32
  • No power supply needed. RLink is powered through the USB connection 12MHz clock available for the user application board -->
  • Cost effective solution
Use:
RLink can be driven not only by RIDE (Raisonance IDE), but also by other tools such as RFlasher, some inline programming applications and ST tools (PSDSoft and CAPS for ?PSD, STVD7 and STVP7 for ST7 and STM8 ).
This is done with no limitation and without the need of a Serial Number, as serialization is ensured by the RLink itself.

Versions:
2 box versions are available:
  • RLink standard (RLink-std, see picture above) allowing:
    • ?PSD debugging and programming
    • ST7 debugging and programming
    • STM8 debugging and programming
    • STR7 full programming, only <32K debugging available
    • STR9 full programming, only <32K debugging available
    • STM32 full programming, only <32K debugging available


     
  • RLink Professional (RLink-Pro, see picture below) allowing unlimited:
    • ?PSD debugging and programming
    • ST7 debugging and programming
    • STM8 debugging and programming
    • STR7 debugging and programming
    • STR9 debugging and programming
    • STM32 debugging and programming

    Note that if you own a RLink standard it is possible to upgrade to RLink-Pro. And Starter-kit (STR7xx-SK), (STR9xx-SK) or (STM32xx-SK) owners can have it at a preferential price.
    See "Ordering Information" below.


 
RLink-Pro full In-Circuit Debugger & Programmer

Other versions of RLink are available delivered with the REva board as part of different starter-kits. In this case RLink is attached to the REva mother board and can be used (if you provide the correct adapter) in order to work as an RLink standard (RLink-std).

Contents:
  • RLink-std or RLink-Pro Debugger/Programmer
  • 4 adapters: ICC-ST7,SWIM-STM8, JTAG ?PSD, JTAG ARM more details here
  • USB cable
  • CD including software tools for the ST7, STM8, 8051(?PSD), STR7, STR9 and STM32 families. See below

     
Note that the contents of the two box versions (RLink-std and RLink-Pro) are the same. The only difference concerns the limitation (or non-limitation) of RLink for the use with ARM microcontrollers.

Software:
The CD includes:
  • RIDE6 (Raisonance Integrated Development Environment) drives RLink and integrates the different 8051 tools
  • 8051 (?PSD) demo tools (C Compiler, Assembler, Linker, Simulator/Debugger) limited to 4kB for RIDE6
     
  • Ride7 (latest Raisonance Integrated Development Environment) drives RLink and has to be used with one of the software tools listed below.
  • RKit-ARM (STR7, STR9 & STM32) software tools (GNU C Compiler, GNU assembler, GNU Linker and Raisonance Simulator/Debugger)
  • RKit-STM8 software tools (C Compiler limited to 16KB, Assembler, Linker, Simulator/Debugger)
  • RFlasher: stand-alone programming included in Ride7 tool that drives RLink for ST7, STM8, STR7 and STR9 microcontrollers

     
 
 


免责声明:以上所展示的信息由企业自行提供,内容的真实性、准确性和合法性由发布企业负责,智能制造网对此不承担任何保证责任。

在线询价

 

广州智维电子科技有限公司

型:
代理商
联系人:
刘落实

联系我时,请说明是在智能制造网上看到的,谢谢

商家概况

主营产品:
CAN总线分析仪、CAN总线数据记录仪、汽车测试系统、过程自动化测控系统、汽车专用测试示波器
公司性质:
代理商

该商家其它产品

广州智维TrivLIN ...

摘要:TrivLIN总线分析工具主要用 [详细]
广州智维电喇叭启动与耐久性能实验台

广州智维电喇叭启...

摘要:根据GB/T15742和QC/T30标准 [详细]
广州智维CAN总线测试、分析和诊断工具

广州智维CAN总线...

摘要:广州智维专业CAN/LIN总线开 [详细]
广州智维汽车电动车窗升降控制总线测试与诊断工具—kvLinLib软件

广州智维汽车电动...

摘要:汽车CAN总线是德国Bosch公 [详细]
CAN/LIN总线控制器编程仿真与编译调试工具

CAN/LIN总线控制...

摘要:RLink是Raisonance公司多功 [详细]
Cosmic 总线ARM芯片编译软件

Cosmic 总线ARM芯...

摘要:Cosmic公司(CosmicSoftware [详细]
现场总线智能传感器模块

现场总线智能传感...

摘要:CANopenliftencodersforele [详细]
现场总线通讯自动监测人机界面

现场总线通讯自动...

摘要:OpusA5-theExplorer7-inchT [详细]

其它商家同类产品


新手指南
了解智能制造卖家注册买家注册操作指南手机智能在线
旗下子站
智能控制机器人物联网3D打印
站点导航
找资讯找公司找产品找展会品牌商城
本站服务
会员服务企业建站广告服务SEO优化