产品详情
KTR齿轮联轴器说明书,KTR齿轮联轴器安装尺寸
BoWex® Curved-tooth gear couplings® are flexible shaft connections for a
positive torque transmission and specifically suitable to compensate for
axial, radial and angular shaft misalignment.
According to the well-known effect of curved-tooth gear couplings®
any edge pressure in the spline in case of
angular and radial displacements is avoided so
that BoWex® couplings are almost free from wear.
BoWex®曲齿齿轮联轴器®是一种柔性轴连接
正扭矩传动特别适合补偿
The material polyamide allows for maintenance-free continuous
operation with very low friction on the teeth.
Due to the double cardanic operation of BoWex® couplings restoring
forces may be neglected in case of angular and radial displacements
and periodic fluctuations in angular velocity do not arise.
BoWex® couplings can be assembled both vertically or horizontally
with no need for any special assembly tools.
Behavior of friction and wear
The smooth and hard surface (crystalline structure) and the high thermal
stability and resistance to lubricants, fuels, hydraulic fluids,
dissolvents, etc. make polyamide an ideal material for components
stressed by sliding, particularly for the coupling production.
轴向,径向和角轴未对准。
根据曲齿齿轮联轴器的*的效果,
避免了角度和径向位移情况下花键的任何边缘压力,使得BoWex®联轴器几乎没有磨损。
Material combination: nylon / steel
KTR齿轮联轴器说明书,KTR齿轮联轴器安装尺寸