产品详情
SEW力矩减速电机价格,赛威电机基本信息
可采用任意安装位置
提供底脚安装和法兰安装形式
MT/MV力矩电机的尺寸与同机座号的DT/DV电机相同。
力矩减速电机同DT/DV减速电机一样采用模块组合概念。
Any mounting position can be used
Provide foot mounting and flange mounting
Available in dual input shaft form
Can be achieved more shaft
Output shaft can provide solid shaft,
可提供双输入轴形式
可实现多出轴
输出轴可提供实心轴、空心轴单键、空心轴锁紧盘、空心轴花键形式
The maximum output torque allowed in level II can be up to three times the starting torque.
Can be used for intermittent cycle operating system S3 / 15%, or increase the strong cold fan for continuous operation.
SEW力矩减速电机价格,赛威电机基本信息
The MT / MV torque motor is the same size as the DT / DV motor of the same unit.
Torque reduction motor with the same DT / DV gear motor module concept.
可提供 1:1的速比,即在不改变速度的情况下实现换向要求
VS型可用于增速
SEW力矩电机为交流电机。
当负载增加时,电机转速能自动的随之降低,而输出力矩增加,保持与负载平衡。
力矩电机的堵转转矩高,堵转电流小,能承受一定时间的堵转运行。
while the output torque increases, to maintain balance with the load.
Torque motor stall torque is high, stall current is small,
can withstand a certain time of stall operation.
Power supply voltage, protection class in line with SEW AC motor.
The electrical design allows the torque motor to run continuously at the starting torque in the case of level I,
regardless of the starting frequency.
hollow shaft single bond, hollow shaft locking disc, hollow shaft spline form
Can provide a 1: 1 ratio, that is, without changing the speed of the case to achieve commutation requirements
VS type can be used for growth
SEW torque motor is AC motor.
When the load increases, the motor speed can be automatically reduced,
可用于断续周期工作制S3/15%,或者增加强冷风扇用于连续工作制。
SEW力矩减速电机价格,赛威电机基本信息