ITV2030-312BS5-Q，SMC电气比例阀

When equipment is serviced, first confirm that measures are in
place to prevent dropping of work pieces and run-away of
equipment, etc. Then cut the supply pressure and power, and
exhaust all compressed air from the system using its residual
pressure release function.
When the equipment is to be started again after remounting or
replacement, first confirm that measures are in place to
prevent lurching of actuators, etc., and then confirm that the
equipment is operating normally.

ITV2030-312BS5-Q，SMC电气比例阀
1. Do not use in atmospheres where the valve
is in direct contact with corrosive gases,
chemicals, salt water, water or steam.
2. Do not use in locations subject to vibration
or impact. Confirm the specifications in the
main section of the catalog.
3. Use a protective cover, etc., to shield valves
from direct sunlight.
4. Shield valves from radiated heat generated
by nearby heat sources.
5. Employ suitable protective measures in
locations where there is contact with oil or
welding spatter, etc.
SY3260-5GD-C4
SY3260-5GD-C6
SY3260-5GD-M5
SY3260-5LD-C4
SY3260-5LD-C6
SY3260-5LD-M5
SY3260-5LOU-C4Q
SY3260-5LSE-M5
SY3260-5LU-C4
SY3260-5LUD-M5
SY3260-5LZ-M5
SY3260-5LZD-C4
SY3260-5LZD-C6
SY3260-5LZD-M5
SY3260-5MZD-C4
SY3260-5MZD-C6
SY3320-3GD-M5
SY3320-3LZD-C6
SY3320-3LZD-M5
SY3320-4GD-C4
SY3320-4GD-C6
SY3320-4GD-M5

ITV2030-312BS5-Q，SMC电气比例阀