ZR-FG22聚全氟乙丙烯绝缘(阻燃)硅橡胶护套钢带铠装耐高温电力电缆

安徽天康（集团）股份有限公司      ：李贻敬

  ：        : 2558004228

一、生产执行标准 GB/T12706-2008  Q/TK08-2013

二、使用特性

1、额定电压UO/U: 0.6/1kV。

2、电缆允许zui高工作温度: 氟塑料绝缘及护套为200℃；氟塑料绝缘耐热105聚氯乙烯护套为105℃；氟塑料绝缘硅橡胶护套为180℃。

3、短路时(zui长持续间不超过5S)电缆导体的zui高温度不超过250℃。

4、电缆敷设温度应不低于-15℃。

5、电缆的弯曲半径如下：单芯电缆：其弯曲半径不小于电缆外径的20D。

三芯电缆:其弯曲半径不小于电缆外径的15D。6、氟塑料绝缘及护套型电力电缆具有优异的耐化学腐蚀

性、耐高温及阻燃性。

二、Performance in Usage

1. Rated voltage UO/U: 0.6/1kv 
2. Max.working temperature allowed by cable is 200℃ for cable with fluoroplastic insulation and sheath, 105℃ for cable with fluoroplastic insulation，105℃ heat resistanc and PVC sheath, and 180℃ for cable with fluo-roplastic insulation and silicon rubber sheath. 

3: Max temperature of cable conductor is no more than 250℃ during short circuit (The longest lasting time isno more than 5s).

 4.Temperature for installation is no less than -15℃.

5.Bending radius of cable as follows:

 It is no less than 20 times that of cable outer diam-eter for cable with single core

It is no less than 15 times that of cable outer diameter for cable with 3 cores

6: Power c able with f luoroplastic insulation and sheath has good features of chemical corrosion resis - tance, high temperature resistance and flame retardance.

三、技术参数（Technical Parameter）

1、20℃导体直流电阻应符合GB/T3956标准规定。（DC resistance of conductor at 20℃ shall meet the requirement of GB/T3956 standard.）

2、电缆应经受3500V交流耐压试验5min绝缘不击穿。（Cable shall bear AC voltage test of 3500V for5min without puncture of insulation.）