供应ZW-2008-全封闭无菌集菌仪多少钱,-智能制造网

产品详情

全封闭无菌集菌仪多少钱产品说明:

ZW-2008集菌仪是一次性使用全封闭集菌培养器的配套使用设施。一体化不锈钢机壳设计：全部采用L304卫生级不锈钢，解决了无菌室. 微生物室高洁净仪器的要求。提高仪器的使用寿命，降低因传统集菌仪表面生锈问题造成的维修、更换等产生的成本。避免了因为化学物质对表面的腐蚀，机壳表面设计不留任何死角。通过集菌仪定向蠕动加压原理，使供试品中微生物截留在滤器中的微孔滤膜（0.22µm*47mm或0.45µm*47mm上，通过冲洗滤膜除去抑菌成分，然后把所需的培养基通过进样管道直接引入全封闭过滤集菌培养器中，放置在培养箱内进行无菌培养。

全封闭无菌集菌仪多少钱适用范围
１、制药行业：纯化水、注射用水、无菌制剂（大输液、小针剂、粉剂、生物制品、血液制品、眼用制剂、保养液等）的无菌检查和微生物限度检查；
２、医疗器械行业：纯化水、注射用水、注射器、*、*、静脉导管等的无菌检查和微生物限度检查；
３、食品、饮料行业；
４、环保行业等。

全封闭无菌集菌仪多少钱主要特征:

1、新型泵头：过滤更顺畅，更均匀，更安全。
2、固定档位设计：设有“40R”“ 60 R”“ 160R”“ 240R” 四大档位，可以满足大输液、粉针、水针等各种剂量供试品的过滤需求。
3、分体式的排液槽设计：可以自由移动，方便操作人员的操作习惯。槽内为弧形设计，废液不会残留在槽内，解决了*实验后可能会产出的细菌。
4、瓶形支架设计：解决了传统的大瓶支架、小瓶支架更换带来的麻烦和操作过程中供试品掉下来的风险。瓶形支架将供试品牢牢固定在支架上，即安全，又美观。
5、智能集菌仪圆形卡口设计：传统式直角卡口在装软管的时候都是很费劲的，有时候还会把管子卡破，造成了经济上的损失，现在圆形卡口，可以轻轻一卡，软管就可以进去，非常方便。
6、一体化开关设计：避免在机壳上开过多的孔，使机壳的清洁度更高，更人性化。
7、扳手根据人体力学设计而成，可以轻松将皮管卡牢。
8、增设脚踏开关，更便于实验操作。

全封闭无菌集菌仪多少钱技术参数:

型号：ZW-2008

电源：220/50Hz
转率：120W
转数：0-240prm
悬架总高度：35cm
重量：15kg
机壳材料：L304不锈钢材料
外形尺寸：42*26*12cm

Product description:

ZW - 2008 set the fungus meter is supporting the use of disposable closed sets the fungus incubator facilities. Integrated stainless steel casing design: adopt L304 sanitary stainless steel, solves the sterile room. High microbial room clean instruments. Improve the service life of equipment, reduce caused by traditional instrument set bacteria surface rust problem of maintenance and replacement costs. Avoided because of the chemical substances on the surface corrosion, the surface of the casing design leave no dead Angle. Through collection of bacteria directional peristaltic compression principle, make the test samples of microorganism intercept microporous membrane filter in the filter (including 0.22 m * (including 47 mm or 0.45 m * 47 mm, by flushing the membrane filter to remove antibacterial ingredients, and then introduce the culture medium by filling pipe directly germ incubators in fully enclosed filter set, placed in the incubator for sterile culture.

Scope of application

1, the pharmaceutical industry: purified water, water for injection, sterile preparations (large infusion, injection, powder, biological products, blood products, liquid eye ophthalmic preparation, maintenance, etc.) for injection asepsis check and microbial limit inspection;

2, medical equipment industry: purified water, water for injection, syringe, infusion, blood transfusion apparatus, such as venous catheter for injection asepsis check and microbial limit inspection;

3, food and beverage industry.

4, the environmental protection industry, etc.

Main features:

: 1, the new pump filter smoother, more even, more secure.

2, fixed gear design: with "R" 40 "R" 60 "160 R" 240 R "big four" file, can satisfy large infusion booster injection, such as the dosage of the water filtration needs.

3, separation of drainage trough design: can move freely, convenient operators operating habits. Waste liquid groove for arc design, will not remain in the groove, after solved the long-term experiment may produce bacteria.

4, bottle shape bracket design: to solve the traditional large bottle of stents, small bottles of replacement of the trouble and operation process of the risk of falling. Bottle shape bracket will be firmly fixed on the bracket, the product is safe, beautiful.

5, inligence collection of bacteria meter circle bayonet design: traditional rectangular bayonet at the time of loading hose is very laborious, sometimes the pipe broken, the economic loss caused by circular bayonet, now can gently one card, hose can go in, is very convenient.

6, integrated switch design: to avoid too many holes in the chassis, chassis cleanliness higher, more human.

7, spanner according to the human body mechanics design and become, can easily on the hose card.

8, add foot switch, easier for experiments.

Technical parameters:

Model: ZW - 2008

Power source: 220/50 hz

Transfer rate: 120 w

The PRM revolutions: 0-240

Suspension total height: 35 cm

15 kg weight:

Casing materials: L304 stainless steel materials

Dimension: 42 * * 12 cm