XGY-10/20管材静液压检验检测设备静液压试验机符合GB/T 6111标准，采用压力控制单元（数显表）或计算机控制，同时可以试验20种DN16-DN630不同规格管径试样，各路独立控制试验压力和时间，计时时间达到8760小时，运行后，自动升压、补压、泄压，可以满足各种热塑性塑料管材*静液压试验或短期静液压试验。

管材静液压检验检测设备静液压试验机适用于铝塑复合压力管、PP-R无规共共聚丙烯管材、PVC-U管材、管件、压力管道系统、塑胶管路系统、地暖管、农业应用管材管件、建筑市政工程工程管件、给水系统管材管件、电力系统管材管件、城镇自来水管道系统、工业原料输送系统管材管件、污水排放用塑料管材、工业应用管材管件、供暖系统管材管件、PP-R给水管材管件、PE给排水管材管件、PE-RT地暖管、铝塑管、给水用硬聚氯乙烯（PVC-U）管材、管件的*静液压性能试验和瞬时爆破压力测定。

管材静液压检验检测设备静液压试验机从压力等级上分为6MPa、10MPa、16MPa、20MPa，从一次试验管材规格上分为1路、2路、3路、4路、5路、6路、7路、8路、9路10路、11路、12路、13路、14路、15路、16路、17路、18路、19路、20路......100路.各路互不干扰。从控制方式上分为 数显表控压、触摸屏+PLC控压、计算机控压、计算机上下位机控制。

管材静液压检验检测设备静液压试验机特点：采用优质不锈钢调节阀，管路采用不锈钢管、接头、高压泵为意大利进口大流量柱塞泵，控制电磁阀采用德国进口GSR阀，安装便于检修、维护；电气元件采用国产正泰、德力西品牌，保证了产品内在质量。显示直观、操作方便实时显示每一路的压力、运行时间、及各个电磁阀的工作状态，当出现异常时，以图形符号显示爆裂、渗漏、试样破裂。

关键部件采用了国外进口的高精度*配件及国内产品，高压泵头采用美国进口高压柱塞泵，电器控制系统采用进口元件，操作部分采用计算机控制系统实时显示试验压力、试验时间；压力传感器的压力采样频率为0.1秒,提高了整体的信号反映速度、控制精度及*工作的可靠性。并且能够实现各路独立控制试验压力、试验时间，当某一路试样完成试验、试样破裂或试样渗漏时不影响其它各路的试验继续进行等特点，从而同时可做多种不同规格、型号及材料的管材试验；本机具有断电保护功能，当停电、因故断电的不良现象出现时，在来电后，试验数据自动恢复，并保留原试验数据，工控机控制的静液压试验机抗*力强，且为国内*，具有很高的性能价格比。

管材静液压检验检测设备静液压试验机

满足以下国家标准

GB/T18742.1—2002《冷热水用聚丙烯管道系统部分：总则》

GB/T18742.2—2002《冷热水用聚丙烯   第二部分：管材》

GB/T18742.3—2002《冷热水用聚丙烯   第三部分：管件》

GB/T13663—2000 《给水用聚乙烯PE管材》

GB/T15558.1—2003《燃气埋地用聚乙烯PE管材》

GB/T15558.2—2005《燃气埋地用聚乙烯PE管件》

GB/T18992.1—2003《冷热水用交联聚乙烯（PE—X）管道系统

部分：总则》

GB/T18992.2—2003《冷热水用交联聚乙烯（PE—X）管道系统

第二部分：管材》

GB/T10002.1—2006《给水用硬聚氯乙烯（PVC—U）管材》

GB/T10002.2—2003《给水用硬聚氯乙烯（PVC—U）管件》

GB/T18993.1—2003《冷热水用氯化聚氯乙烯（PVC—C）管道系统

部分：总则》

GB/T18993.1—2003《冷热水用氯化聚氯乙烯（PVC—C）管道系统

第二部分：管材》

GB/T18993.2—2003《冷热水用氯化聚氯乙烯（PVC—C）管道系统

第三部分：管件》

GB/T18997.1—2003《铝塑复合压力管 部分：铝管搭接焊式铝塑管》

GB/T18997.2—2003《铝塑复合压力管 第二部分：铝管对接焊式铝塑管》

ISO 1167、GB/T 6111、GB/T15560、ASTM D1598、ISO 9080、GB/T 18252、CJ/T108-1999和ASTM F1335等标准要求。

XGY-10/20管材静液压检验检测设备静液压试验机符合GB/T 6111标准，采用压力控制单元（数显表）或计算机控制，同时可以试验20种DN16-DN630不同规格管径试样，各路独立控制试验压力和时间，计时时间达到8760小时，运行后，自动升压、补压、泄压，可以满足各种热塑性塑料管材*静液压试验或短期静液压试验。

管材静液压检验检测设备静液压试验机适用于铝塑复合压力管、PP-R无规共共聚丙烯管材、PVC-U管材、管件、压力管道系统、塑胶管路系统、地暖管、农业应用管材管件、建筑市政工程工程管件、给水系统管材管件、电力系统管材管件、城镇自来水管道系统、工业原料输送系统管材管件、污水排放用塑料管材、工业应用管材管件、供暖系统管材管件、PP-R给水管材管件、PE给排水管材管件、PE-RT地暖管、铝塑管、给水用硬聚氯乙烯（PVC-U）管材、管件的*静液压性能试验和瞬时爆破压力测定。

管材静液压检验检测设备静液压试验机从压力等级上分为6MPa、10MPa、16MPa、20MPa，从一次试验管材规格上分为1路、2路、3路、4路、5路、6路、7路、8路、9路10路、11路、12路、13路、14路、15路、16路、17路、18路、19路、20路......100路.各路互不干扰。从控制方式上分为 数显表控压、触摸屏+PLC控压、计算机控压、计算机上下位机控制。

管材静液压检验检测设备静液压试验机特点：采用优质不锈钢调节阀，管路采用不锈钢管、接头、高压泵为意大利进口大流量柱塞泵，控制电磁阀采用德国进口GSR阀，安装便于检修、维护；电气元件采用国产正泰、德力西品牌，保证了产品内在质量。显示直观、操作方便实时显示每一路的压力、运行时间、及各个电磁阀的工作状态，当出现异常时，以图形符号显示爆裂、渗漏、试样破裂。

关键部件采用了国外进口的高精度*配件及国内产品，高压泵头采用美国进口高压柱塞泵，电器控制系统采用进口元件，操作部分采用计算机控制系统实时显示试验压力、试验时间；压力传感器的压力采样频率为0.1秒,提高了整体的信号反映速度、控制精度及*工作的可靠性。并且能够实现各路独立控制试验压力、试验时间，当某一路试样完成试验、试样破裂或试样渗漏时不影响其它各路的试验继续进行等特点，从而同时可做多种不同规格、型号及材料的管材试验；本机具有断电保护功能，当停电、因故断电的不良现象出现时，在来电后，试验数据自动恢复，并保留原试验数据，工控机控制的静液压试验机抗*力强，且为国内*，具有很高的性能价格比。

管材静液压检验检测设备静液压试验机

满足以下国家标准

GB/T18742.1—2002《冷热水用聚丙烯管道系统部分：总则》

GB/T18742.2—2002《冷热水用聚丙烯   第二部分：管材》

GB/T18742.3—2002《冷热水用聚丙烯   第三部分：管件》

GB/T13663—2000 《给水用聚乙烯PE管材》

GB/T15558.1—2003《燃气埋地用聚乙烯PE管材》

GB/T15558.2—2005《燃气埋地用聚乙烯PE管件》

GB/T18992.1—2003《冷热水用交联聚乙烯（PE—X）管道系统

部分：总则》

GB/T18992.2—2003《冷热水用交联聚乙烯（PE—X）管道系统

第二部分：管材》

GB/T10002.1—2006《给水用硬聚氯乙烯（PVC—U）管材》

GB/T10002.2—2003《给水用硬聚氯乙烯（PVC—U）管件》

GB/T18993.1—2003《冷热水用氯化聚氯乙烯（PVC—C）管道系统

部分：总则》

GB/T18993.1—2003《冷热水用氯化聚氯乙烯（PVC—C）管道系统

第二部分：管材》

GB/T18993.2—2003《冷热水用氯化聚氯乙烯（PVC—C）管道系统

第三部分：管件》

GB/T18997.1—2003《铝塑复合压力管 部分：铝管搭接焊式铝塑管》

GB/T18997.2—2003《铝塑复合压力管 第二部分：铝管对接焊式铝塑管》

ISO 1167、GB/T 6111、GB/T15560、ASTM D1598、ISO 9080、GB/T 18252、CJ/T108-1999和ASTM F1335等标准要求。

XGY - 10/20 pipe hydrostatic test testing equipment conforms to the standard GB/T 6111, hydrostatic testing machine adopts the pressure control unit (digital display table) or computer control, at the same time can test 20 DN16 - DN630 diameter specimens with different specs, various independent control test pressure and time, timing time of 8760 hours, after the operation, automatic booster, filling pressure, pressure, can satisfy all sorts of thermoplastic pipe hydrostatic test for a long time or short term hydrostatic test.

Pipe hydrostatic test testing equipment hydrostatic testing machine is suitable for the composite pressure pipe, pp-r atactic polypropylene pipe, PVC -u pipe, pipe fittings, plastic pressure pipeline system, piping system, floor heating tubes, agricultural application of pipe fittings, building municipal engineering project fitting pipe fitting, electric power system, water supply system pipe fitting, urban tap water pipe system, industrial raw material conveying system pipe pipe fittings, plastic tubing in sewage discharge, industrial application of pipe fitting, the heating system pipe fitting, pp-r water supply pipe fitting, PE water supply and drainage pipe fitting, PE - RT floor heating tubes, aluminum-plastic tubes, water supply with rigid polyvinyl chloride (PVC -u) pipes, pipe fittings, long-term performance of hydrostatic test and instantaneous blasting pressure measurement.

Pipe hydrostatic test testing equipment from the pressure level is divided into 6 mpa hydrostatic testing machine, 10 mpa, 16 mpa, 20 mpa, from a test tube specifications are divided into 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20...
One hundred ways. The roads don't interfere with each other.
The control method is divided into digital display control pressure, touch screen +PLC control, computer control and computer control.

Pipe hydrostatic test testing equipment hydrostatic testing machine features: high quality stainless steel valve, pipe is made of stainless steel tube, connectors, high pressure pump plunger pump for the Italian import large flow, control solenoid valve using imported German GSR, installation is convenient for maintenance, maintenance;
The electric component adopts the domestic zhengtai and the delixi brand, which guarantees the quality of the product.
Display intuitive, easy to operate, real-time display each operating time, pressure, and all the way each solenoid valve working condition, when an exception, displayed in a graphic symbol blowout, leakage, the broken sample.

Key components adopts the advanced imported high-precision fittings and domestic high-end products, high pressure pump head in U.S. imports of high-pressure plunger pump and electric control system adopts imported components, operating part adopts computer control system of real-time display test pressure, test time.
The pressure sampling frequency of pressure sensor is 0.1 second, which improves the overall signal response speed, control accuracy and reliability of long-term work.
And can realize independent control of all stripes test pressure, test time, when a sample all the way to complete the test, the specimen rupture or leakage does not affect other various test when continue wait for a characteristic, which can be done at the same time a variety of different models and specifications, material of pipe test;
This machine with electricity protective function, when a power outage, due to the bad phenomena of power occurs, after the call, the test data recovery, and keep the original test data, strong anti-jamming capability, industrial computer control of hydrostatic testing machine for domestic initiative, has the very high cost performance.

Static hydraulic testing machine for pipe hydraulic test equipment

Meet the following national standards

GB/T18742.1-2002 "cold and hot water polypropylene pipe system part: general"

GB/T18742.2-2002 "cold and hot water polypropylene part ii: pipes"

GB/T18742.3-2002 "cold and hot water polypropylene part iii: pipe fittings"

GB/T13663-2000 PE pipe for water supply

GB/T15558.1-2003 "PE pipe for the buried of gas"

GB/t15558.2-2005 "PE pipe for burning gas"

GB/T18992.1-2003 "cold and hot water crosslinked polyethylene (PE - X) piping system.

Part: general rules

GB/T18992.2-2003 "cold and hot water crosslinked polyethylene (PE - X) piping system.

Part two: pipe material

GB/T10002.1-2006 "water supply hard polyvinyl chloride (PVC - U) pipe"

GB/T10002.2-2003 water supply hard polyvinyl chloride (PVC - U) pipe fittings

GB/T18993.1-2003 "cold and hot water chlorinated polyvinyl chloride (PVC - C) piping system.

Part: general rules

GB/T18993.1-2003 "cold and hot water chlorinated polyvinyl chloride (PVC - C) piping system.

Part two: pipe material

GB/T18993.2-2003 "cold and hot water chlorinated polyvinyl chloride (PVC - C) piping system.

Part iii: pipe fittings

GB/t18997.1-2003 "aluminum plastic composite pressure pipe part: aluminum tube bonding welded aluminum plastic pipe"

GB/T18997.2-2003 "aluminum plastic composite pressure tube part ii: aluminum pipe butt welded aluminum plastic pipe"

ISO 1167, GB/T 6111, GB/T15560, ASTM D1598, ISO 9080, GB/T 18252, CJ/t108-1999 and ASTM F1335 standard requirements.

XGY - 10/20 pipe hydrostatic test testing equipment conforms to the standard GB/T 6111, hydrostatic testing machine adopts the pressure control unit (digital display table) or computer control, at the same time can test 20 DN16 - DN630 diameter specimens with different specs, various independent control test pressure and time, timing time of 8760 hours, after the operation, automatic booster, filling pressure, pressure, can satisfy all sorts of thermoplastic pipe hydrostatic test for a long time or short term hydrostatic test.

Pipe hydrostatic test testing equipment hydrostatic testing machine is suitable for the composite pressure pipe, pp-r atactic polypropylene pipe, PVC -u pipe, pipe fittings, plastic pressure pipeline system, piping system, floor heating tubes, agricultural application of pipe fittings, building municipal engineering project fitting pipe fitting, electric power system, water supply system pipe fitting, urban tap water pipe system, industrial raw material conveying system pipe pipe fittings, plastic tubing in sewage discharge, industrial application of pipe fitting, the heating system pipe fitting, pp-r water supply pipe fitting, PE water supply and drainage pipe fitting, PE - RT floor heating tubes, aluminum-plastic tubes, water supply with rigid polyvinyl chloride (PVC -u) pipes, pipe fittings, long-term performance of hydrostatic test and instantaneous blasting pressure measurement.

Pipe hydrostatic test testing equipment from the pressure level is divided into 6 mpa hydrostatic testing machine, 10 mpa, 16 mpa, 20 mpa, from a test tube specifications are divided into 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20...
One hundred ways. The roads don't interfere with each other.
The control method is divided into digital display control pressure, touch screen +PLC control, computer control and computer control.

Pipe hydrostatic test testing equipment hydrostatic testing machine features: high quality stainless steel valve, pipe is made of stainless steel tube, connectors, high pressure pump plunger pump for the Italian import large flow, control solenoid valve using imported German GSR, installation is convenient for maintenance, maintenance;
The electric component adopts the domestic zhengtai and the delixi brand, which guarantees the quality of the product.
Display intuitive, easy to operate, real-time display each operating time, pressure, and all the way each solenoid valve working condition, when an exception, displayed in a graphic symbol blowout, leakage, the broken sample.

Key components adopts the advanced imported high-precision fittings and domestic high-end products, high pressure pump head in U.S. imports of high-pressure plunger pump and electric control system adopts imported components, operating part adopts computer control system of real-time display test pressure, test time.
The pressure sampling frequency of pressure sensor is 0.1 second, which improves the overall signal response speed, control accuracy and reliability of long-term work.
And can realize independent control of all stripes test pressure, test time, when a sample all the way to complete the test, the specimen rupture or leakage does not affect other various test when continue wait for a characteristic, which can be done at the same time a variety of different models and specifications, material of pipe test;
This machine with electricity protective function, when a power outage, due to the bad phenomena of power occurs, after the call, the test data recovery, and keep the original test data, strong anti-jamming capability, industrial computer control of hydrostatic testing machine for domestic initiative, has the very high cost performance.

Static hydraulic testing machine for pipe hydraulic test equipment

Meet the following national standards

GB/T18742.1-2002 "cold and hot water polypropylene pipe system part: general"

GB/T18742.2-2002 "cold and hot water polypropylene part ii: pipes"

GB/T18742.3-2002 "cold and hot water polypropylene part iii: pipe fittings"

GB/T13663-2000 PE pipe for water supply

GB/T15558.1-2003 "PE pipe for the buried of gas"

GB/t15558.2-2005 "PE pipe for burning gas"

GB/T18992.1-2003 "cold and hot water crosslinked polyethylene (PE - X) piping system.

Part: general rules

GB/T18992.2-2003 "cold and hot water crosslinked polyethylene (PE - X) piping system.

Part two: pipe material

GB/T10002.1-2006 "water supply hard polyvinyl chloride (PVC - U) pipe"

GB/T10002.2-2003 water supply hard polyvinyl chloride (PVC - U) pipe fittings

GB/T18993.1-2003 "cold and hot water chlorinated polyvinyl chloride (PVC - C) piping system.

Part: general rules

GB/T18993.1-2003 "cold and hot water chlorinated polyvinyl chloride (PVC - C) piping system.

Part two: pipe material

GB/T18993.2-2003 "cold and hot water chlorinated polyvinyl chloride (PVC - C) piping system.

Part iii: pipe fittings

GB/t18997.1-2003 "aluminum plastic composite pressure pipe part: aluminum tube bonding welded aluminum plastic pipe"

GB/T18997.2-2003 "aluminum plastic composite pressure tube part ii: aluminum pipe butt welded aluminum plastic pipe"

ISO 1167, GB/T 6111, GB/T15560, ASTM D1598, ISO 9080, GB/T 18252, CJ/t108-1999 and ASTM F1335 standard requirements.